LL GLOBAL UA
Y5W, HY10WZ

Y5W, HY10WZ

Polymer-housed metal-oxide surge arresters for AC systems

Gapless metal-oxide surge arresters in polymer (composite) housing. Connected in parallel with line and substation equipment to protect it against lightning and switching overvoltages.

Key parameters

System nominal voltage
35; 66; 110; 220 kV
Nominal discharge current
5 / 10 kA
Rated arrester voltage
54 … 200 kV
Long-duration current impulse (2 ms rectangular)
400 / 800 A

General information

The polymer-housed (composite-housed) metal-oxide surge arrester (hereinafter — arrester) is connected in parallel with power transmission and transformer substation equipment and protects this equipment from damage by lightning and switching overvoltages.

Type designation

Y10WZ2-100/260G
YPolymer-housed metal-oxide surge arrester without gaps
10Nominal discharge current, kA
WWithout gaps
ZStation class
2Design serial number
100Rated voltage of the arrester, kV
260Lightning impulse residual voltage at nominal discharge current, kV
GHigh-altitude version

Service conditions

  • Ambient temperature: −40 °C … +40 °C.
  • Altitude: not more than 1000 m.
  • System frequency: not above 62 Hz and not below 48 Hz.
  • Maximum wind speed: not more than 35 m/s.
  • Areas with seismic intensity below 7 degrees.
  • The power-frequency voltage continuously applied to the arrester must not exceed its continuous operating voltage.
  • Abnormal service conditions — on request when ordering.

Main ratings and technical parameters

Arrester ratings and technical parameters
ModelNominal system voltage, kVRated voltage of the arrester, kVContinuous operating voltage, kVLightning impulse residual voltage at nominal discharge current, ≤ kVDC 1 mA reference voltage, ≥ kV2 ms rectangular wave current withstand, A
Y5W-51/134355443.213477400
Y5WZ-96/235669667.2235121400
Y10WZ-100/26011010079.6260148800
Y10W-102/26611010279.6260148800
Y10W-108/281220200156490290800

All products